Explanation:
1 m. , 1.5 m. and 2 m.) The front face is 10 cm. width, 125 mm from the sides. and bent back 90 °, 1.2 mm. Carbonless decabes are made of sheet metal.
Construction
1 m. , 1.5 m. or 2 m.recycled decahn sheets are discharged to acid tank for cleaning oil and paste.
Then the lining is laid on the sheet and fired at 860 - 870 ° C.
After this process the white enamel is fired at 860-870 ° C.
After the white enamel baking process the figures are transferred onto the Staff Gauge (as a sticker or print).
It is fired again for 3 times at 840-850 ° C.
It is not possible to erase and scratch digits after baking.
The numbers should be well penetrated into the enamel, the boil should be provided.
The final models are manufactured from 1 m to the top point and can be added up to the desired meter.
